The Philips Bodine BLS310 is a three-phase AC motor starter that is used to control the speed and direction of a three-phase AC motor. The starter is equipped with a thermal overload protection device that protects the motor from overheating. The starter is also equipped with a manual disconnect switch that allows the motor to be turned off and on manually.
The BLS310 starter is a versatile and reliable starter that can be used in a variety of applications. The starter is available in a variety of voltage and current ratings to meet the needs of different applications. The starter is also available in a variety of enclosure types to meet the requirements of different environments.
The BLS310 starter is easy to install and maintain. The starter is also easy to troubleshoot. The starter is a good choice for applications that require a reliable and easy-to-use three-phase AC motor starter.
The following is a wiring diagram for the Philips Bodine BLS310 starter:
In this diagram, the following components are labeled:
* L1, L2, and L3 are the three-phase AC power leads. * T1, T2, and T3 are the three-phase motor leads. * M is the motor contactor. * OL is the thermal overload protection device. * SW is the manual disconnect switch.
The following is a description of how the BLS310 starter works:
When the manual disconnect switch is turned on, power is supplied to the M contactor. The M contactor closes, connecting L1, L2, and L3 to T1, T2, and T3, respectively. This starts the motor.
The OL device monitors the current flowing through the motor. If the current exceeds the set value, the OL device will open, disconnecting L1, L2, and L3 from T1, T2, and T3, respectively. This stops the motor.
The BLS310 starter is a versatile and reliable starter that can be used in a variety of applications. The starter is easy to install, maintain, and troubleshoot. The starter is a good choice for applications that require a reliable and easy-to-use three-phase AC motor starter.
Ss4 Led Ic
Bsl310c Bsl310m
Installation Instructions
Bodine Bsl310c Emergency Led Driver 120 277v Up To 10 Watt Rexel Usa
Philips Bodine 120 Volt To 277 Bsl310 10 Watt Led Emergency Driver 506089
Emergency Solutions For Xitanium Sr Drivers And Compatible Sensors
Installation Guide
B50ct Signify
Untitled
Philips Lighting Evokit2x2 P 32l 31w 840 5 Mk10 7 G3 2 X Led Retrofit Kit Discontinued Gexpro
Day Brite Cfi Fluxgrid Recessed Led Specifications Manualzz
Installation Guide
Installation Instructions
The Reliable Flexible Choice For Easy Led Emergency Driver Design In
Avenue 6
Bsl17c C2st Philips Bodine Emergency Lighting Manualzz
X In Situ Temp Test Istmt Results Shall Not Exceed 35 C When Measured With A 20 Watt Driver Powering 2 Of The Strips
Bodine Bsl310 Led Emergency Driver Literite Controls
Application Note Emergency Solutions For Xitanium Sr Drivers Compatible Sensors Distributed And Central I
Bsl310can Spec Std L2300212