2 Way Switch Wiring Two Lights

A two-way switch is a type of electrical switch that allows you to control a light or other electrical device from two different locations. This is useful in situations where you need to be able to turn a light on or off from both ends of a hallway, for example. Wiring a two-way switch is a relatively simple task, but it is important to follow the instructions carefully to ensure that the switch is wired correctly. ### Materials * Two-way switch * Two single-pole switches * Three wire nuts * Electrical tape * Wire strippers * Screwdriver ### Steps 1. Turn off the power to the circuit that you are working on at the breaker box. 2. Remove the cover plate from the existing switch box. 3. Remove the old switch from the box. 4. Connect the black wire from the power source to the "common" terminal on the two-way switch. 5. Connect the black wire from the light fixture to one of the "traveler" terminals on the two-way switch. 6. Connect the remaining black wire from the light fixture to one of the "traveler" terminals on the single-pole switch. 7. Connect the white wire from the power source to the "neutral" terminal on the two-way switch and the single-pole switch. 8. Connect the ground wire from the power source to the "ground" terminal on the two-way switch and the single-pole switch. 9. Replace the cover plates on the switch boxes. 10. Turn on the power to the circuit. ### Testing the Switch Once you have wired the two-way switch, you can test it to make sure that it is working properly. 1. Turn on the light switch. 2. Walk to the other end of the hallway and turn on the second light switch. 3. The light should turn on at both ends of the hallway. 4. Turn off the second light switch. 5. The light should turn off at both ends of the hallway. If the light does not work properly, you may need to check the wiring to make sure that it is connected correctly. ### Safety Tips * Always turn off the power to the circuit that you are working on before beginning any electrical work. * Wear gloves to protect your hands from electrical shock. * Use caution when working with sharp objects, such as wire strippers. * Keep children and pets away from the work area. ### Conclusion Wiring a two-way switch is a relatively simple task, but it is important to follow the instructions carefully to ensure that the switch is wired correctly. By following the steps in this article, you can easily wire a two-way switch and control a light or other electrical device from two different locations.

Need Help Wiring Two Lights To Switches Doityourself Com Community Forums